|
 |
2008 Doosan Mega160
|
 |
|
|
|
|
Comfort
Ergonomically designed operating cab provides operator the most space in its class. The wide front and rear visibility allows for optional productivity the interior has been luxuriously designed including easy operation.
Performance
High efficiency, and low fuel consumption. Turbocharged engine power the solar-V series into a class of its own.
Durability
Overall durability has been increased by new design and manufacturing technique which included stress analysis and computer design.
|
|
|
|
| GENERAL INFORMATION | |
|
|
|
|
|
| Manufacturer |
|
Doosan |
|
|
| Model Year |
|
2008 |
|
|
| Model |
|
Mega160 |
|
|
| MSRP |
|
Request a Quote
|
|
|
| DIMENSIONS | |
| Length Overall |
|
20 ft. 10 in. (6,3990 mm) - 21 ft. 7 in. (6,620 mm) |
|
|
| Height |
|
10 ft. 5 in. (3,180 mm) |
|
|
| Width |
|
8 ft. (2,450 mm) |
|
|
| Weight |
|
18,960 lbs. (8,600 kgf) |
|
|
| Wheelbase |
|
9 ft. 10 in. (2,700 mm) |
|
|
| Ground Clearance |
|
1 ft. 4 in. (405 mm) |
|
|
| Turning Radius |
|
Cutting Edge: 17 ft. 7 in. (5,390 mm)
Tooth: 17 ft. 8 in. (5,440 mm) |
|
|
| Fuel Tank Capacity |
|
48.9 gal. (185 l) |
|
|
| Hydraulic Tank Capacity |
|
26.4 gal. (100 l) |
|
|
| DRIVETRAIN | |
| Transmission Make |
|
Full auto power-shift design with four forward and three reverse speeds |
|
|
| Transmission Speed |
|
Forward:
1: 4.1 mph (6.6 km/h)
2: 7.3 mph (11.7 km/h)
3: 13.3 mph (21.4 km/h)
4: 21.4 mph (34.5 km/h)
Reverse:
1: 4.4 mph (7.1 km/h)
2: 7.6 mph (12.2 km/h)
3: 13.9 mph (22.4 km/h) |
|
|
| Number of Speeds |
|
4 forward / 3 reverse |
|
|
| Tire Size |
|
17.5-25-12PR |
|
|
| Axles |
|
Rigid front axle, oscillating rear axle with planetary reduction gears in each wheel hub |
|
|
| ENGINE | |
| Engine Make |
|
Doosan |
|
|
| Engine Model |
|
DB58 |
|
|
| Fuel Type |
|
Diesel |
|
|
| Bore x Stroke |
|
4.02 x 4.65 in. (102 x 118 mm) |
|
|
| Cylinders |
|
6 |
|
|
| Gross Horsepower |
|
110 hp (81 kW) |
|
|
| Displacement |
|
353 ci (5,785 cc) |
|
|
| Net Horsepower |
|
104 hp (77 kW) |
|
|
| Torque |
|
268 ft. lbs. (37 kg.m) @ 1,600 rpm |
|
|
| Cooling |
|
Pusher plastic fan pressurized radiator |
|
|
| Rated Speed |
|
2,200 rpm |
|
|
| Speed Forward |
|
1: 4.1 mph (6.6 km/h)
2: 7.3 mph (11.7 km/h)
3: 13.3 mph (21.4 km/h)
4: 21.4 mph (34.5 km/h) |
|
|
| Speed Reverse |
|
1: 4.4 mph (7.1 km/h)
2: 7.6 mph (12.2 km/h)
3: 13.9 mph (22.4 km/h) |
|
|
| BATTERY | |
| Voltage |
|
24V |
|
|
| Amps |
|
50A |
|
|
| HYDRAULICS | |
| Hydraulic Reserve |
|
Sealed system with anticavitation and relief valves |
|
|
| Std Pump Flow |
|
37 gpm (140 lpm) @ 2,845 psi (200 kg / sq. cm) |
|
|
| OPERATIONAL | |
| Tipping Load |
|
Straight: 14,330 ft. lbs. (6,500 kgf)
Full Turn - Cutting Edge: 11,680 ft. lbs. (5,300 kgf)
Full Turn - Tooth: 14,330 ft. lbs. (6,500 kgf) |
|
|
| Bucket Capacity |
|
Cutting Edge: 2.1 cu. yd. (1.6 cu. m.)
Tooth: 2.1 cu. yd. (1.5 cu. m.) |
|
|
| Height to Bucket Pin |
|
3,610 mm |
|
|
| Dump Height |
|
Cutting Edge: 9 ft. (2,745 mm)
Tooth: 8 ft. 8 in. (2,685 mm) |
|
|
| Dump Reach |
|
Cutting Edge: 3 ft. 4 in. (1,020 mm)
Tooth: 3 ft. 5 in. (1,073 mm) |
|
|
| Bucket Breakout |
|
17,200 ft. lbs. (7,800 kgf) |
|
|
| Max Dump Angle |
|
47° |
|
|
| Total Cycle Time |
|
Lift: 6 sec.
Lower: 3.1 sec.
Dump: 1.5 sec. |
|
|
|
|
|
|
|
|
|
Photos may show optional equipment
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected. |
|
|
|
|
|
|
|
|
Specs, Quotes, Overview